| BEARING PRELOAD RATING | 10.0 POUNDS NOMINAL |
| BORE DIAMETER | 0.3750 INCHES NOMINAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL | LUBRICATING OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| OVERALL OUTSIDE DIAMETER | 0.6250 INCHES NOMINAL |
| OVERALL WIDTH | 0.3125 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RETAINER |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| SPECIAL FEATURES | 10 GM CM STARTING TORQUE WITH 8 TO 12 LB PRELOAD,2 DROPS OF SPECIFIED LUBRICANT IN EACH BEARING USING A NO. 26 HYPODERMIC NEEDLE,BORE AND OD OF EACH PR OF BEARINGS MATCHED WITHIN 0.000050 IN. OF EACH OTHER,EACH PR SHALL BE CODED IN 0.000050 IN. INCREMENTS PER AFBMA SECTION 12,TORRIDS AROUND ALTERNATE BALLS LOOSELY FIT |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING |
| SURFACE FINISH | GROUND |