|
|
|
National Stock Number:
3110-00-198-2926
Federal Supply Class:
3110
National Item Identification Number:
001982926
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 111X00412X2004 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 3110PL2091324 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 712733-1 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 713477 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 77-R-4AX1 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | AMS1KDD | 21335 | TIMKEN CO | | MIL-STD-102 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SS77R4AX3025E | 24617 | GENERAL MOTORS CORP | | SS77R4AX3025E | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | SS77R4AX3E | 24617 | GENERAL MOTORS CORP | | SS77R4AX3E | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | SS77R4AXR1ES | 81868 | TELAIR US LLC | | SS77R4AXR3E5 | 24617 | GENERAL MOTORS CORP | | SS77R4AXR3E5 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | SSRI-1214ZZSD504RA3P25LG68 | 50294 | NEW HAMPSHIRE BALL BEARINGS INC |
|
Techincal Specification:
| BORE DIAMETER | 0.2500 INCHES NOMINAL | | BORE SHAPE | STRAIGHT | | INTERNAL FIT-UP DESIGNATION | STANDARD | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | OVERALL OUTSIDE DIAMETER | 0.7500 INCHES NOMINAL | | OVERALL WIDTH | 0.2812 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | RETAINER FABRICATION METHOD | PRESSED | | SHIELD QUANTITY | 2 | | SPECIAL FEATURES | PRESSED STAINLESS STEEL RETAINER HEAT TREAT PARTS PER MIL-H-6875;IMMEDIATELY AFTER QUENCHING, REFRIGERATE PARTS AT MINUS 120 TO MINUS 90 DEG F FOR 2 HOURS;FOLLOWED BY TEMPERING AT A MINIMUM TEMP OF PLUS 325 DEG F FOR 3 HOURS;REPEAT REFRIGERATION AND TEMPERING STEPS AT LEAST ONCE; FINAL HARDNESS SHOULD BE ROCKWELL C-58 MIN; FF-B-171 APPLIES EXCEPT FOR BEARING TYPE AND DIMENSIONS; ALL OTHER ATTRIBUTES OF THIS BEARING ARE I/A/W FF-B-171 QAP EQ003 APPLIES SOURCE INSPECTION REQUIRED | | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|