| MATERIAL | STEEL COMP E52100 INNER RING |
| STEEL COMP 4620 ROD END BODY |
| STEEL COMP E52100 ROLLER |
| RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| STEEL COMP 430 SHIELD |
| STEEL SNAP RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 3.0460 INCHES NOMINAL |
| BORE DIAMETER | 0.3125 INCHES NOMINAL |
| OVERALL OUTSIDE DIAMETER | 1.3600 INCHES MINIMUM AND |
| 1.4100 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.4600 INCHES NOMINAL |
| INNER RING WIDTH | 0.6870 INCHES NOMINAL |
| LENGTH FROM BORE CENTER TO SHANK END | 2.3120 INCHES NOMINAL |
| SHANK STYLE | INTERNALLY THREADED |
| SHANK DIAMETER | 0.6870 INCHES NOMINAL |
| WIDTH ACROSS FLATS | 0.6870 INCHES NOMINAL |
| SHANK THREAD LENGTH | 1.3100 INCHES MINIMUM AND |
| 1.3700 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SHIELD QUANTITY | 2 |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SPECIAL FEATURES | WITH MEANS FOR RELUBRICATION,0.0700 IN. DIA INSPECTION HOLE |
| LUBRICATION MATERIAL | GREASE |