| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| DISTANCE BETWEEN FLANGE HOLE CENTERS | 1.3070 INCHES MINIMUM AND 1.3170 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 1.6150 INCHES MINIMUM AND 1.6350 INCHES MAXIMUM |
| FLANGE WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| INNER RING WIDTH | 0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| OUTER RING OUTSIDE DIAMETER | 0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL COMP E52100 RETAINER |
| RETAINER FABRICATION METHOD | MACHINED |
| RIVET HOLE DIAMETER | 0.1400 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM |
| RIVET HOLE QUANTITY | 12 |
| SEAL QUANTITY | 2 |
| STYLE DESIGNATOR | DOUBLE ROW BALL, DOUBLE CLOSURE, RIGID INNER RING EXTENDED BOTH SIDES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BORE |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| SURFACE TREATMENT | CADMIUM BORE |