| BORE DIAMETER | 0.0935 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM |
| BORE SHAPE | STRAIGHT |
| INNER RING WIDTH | 0.2600 INCHES MINIMUM AND 0.2750 INCHES MAXIMUM |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| OUTER RING WIDTH | 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES SHIELD |
| MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 322 OR STEEL COMP 324 SHIELD |
| MATERIAL | STEEL COMP 440A OUTER RING |
| MATERIAL | STEEL COMP 440A BALL |
| MATERIAL | STEEL COMP 440A INNER RING |
| SPECIAL FEATURES | 20.0 DEGREE CONTACT ANGLE,DUPLEXED PAIR |
| SHIELD QUANTITY | 2 |
| STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |