| BORE DIAMETER | 0.1875 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| CALIBRATION DESIGNATOR | C44 |
| FLANGE OUTSIDE DIAMETER | 0.5650 INCHES NOMINAL |
| FLANGE WIDTH | 0.0420 INCHES NOMINAL |
| INTERNAL CLEARANCE | 0.0008 INCHES MINIMUM RADIAL AND 0.0024 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | ANGULAR |
| LUBRICATION MATERIAL | GREASE OR OIL |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC 1ST MATERIAL RESPONSE OR XRL743A,FSCM 77988 MFR REF 2ND MATERIAL RESPONSE |
| OUTER RING OUTSIDE DIAMETER | 0.5000 INCHES NOMINAL |
| OVERALL WIDTH | 0.1562 INCHES NOMINAL |
| MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATERIAL | STEEL CORROSION RESISTING BALL |
| MATERIAL | STEEL CORROSION RESISTING INNER RING |
| MATERIAL | STEEL CORROSION RESISTING OUTER RING |
| RETAINER FABRICATION METHOD | MOLDED |
| SPECIAL FEATURES | PACK BEARING 10 PERCENT FULL OF SPECIFIED GREASE ALSO BALL CONTACT ANGLE 14 DEG MIN TO 25 DEG MAX |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| STYLE DESIGNATOR | SHOULDERED INNER RING, SEPARABLE |
| SURFACE FINISH | GROUND |