|
|
|
National Stock Number:
3110-00-180-7393
Federal Supply Class:
3110
National Item Identification Number:
001807393
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 907279 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | BH1232 | 46964 | LIFT-TECH INTL INC CRANE AND HOIST OPNS | | FF-B-171 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 1.2500 INCHES NOMINAL | | BORE SHAPE | STRAIGHT | | INNER RING WIDTH | 0.7293 INCHES NOMINAL | | INTERNAL CLEARANCE | 0.0015 INCHES MINIMUM RADIAL AND 0.0025 INCHES MAXIMUM RADIAL | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL | GREASE | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE | | OUTER RING WIDTH | 0.6693 INCHES NOMINAL | | OVERALL OUTSIDE DIAMETER | 2.5625 INCHES NOMINAL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL BALL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL RETAINER | | RETAINER FABRICATION METHOD | PRESSED | | SEAL QUANTITY | 1 | | SHIELD QUANTITY | 1 | | SPECIAL FEATURES | AUTOMOTIVE REAR WHEEL BEARING | | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|