| BORE DIAMETER | 0.5000 INCHES NOMINAL |
| BORE SHAPE | STRAIGHT |
| INTERNAL CLEARANCE | 0.0004 INCHES MINIMUM RADIAL AND 0.0010 INCHES MAXIMUM RADIAL |
| LOAD DIRECTION | RADIAL |
| LUBRICATION MATERIAL | GREASE |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| OVERALL OUTSIDE DIAMETER | 1.1250 INCHES NOMINAL |
| OVERALL WIDTH | 0.3125 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 40456-78,81982 MFR REF SINGLE MATERIAL RESPONSE RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | 40456-78,81982 MFR REF SINGLE MATERIAL RESPONSE SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| MATERIAL | STEEL COMP E52100 SHIELD |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| MATERIAL | STEEL RETAINER |
| RETAINER FABRICATION METHOD | PRESSED |
| SHIELD QUANTITY | 2 |
| SPECIAL FEATURES | BEARING FILLED 40 PCT FULL WITH LUBRICANT |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.1 |
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| SURFACE FINISH | GROUND |
| TEST DATA DOCUMENT | 40456-78-00502 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |