| MATERIAL | STEEL COMP E52100 INNER RING |
| STEEL COMP E52100 OUTER RING |
| STEEL COMP E52100 RETAINER |
| ALUMINUM ALLOY 7075 ROD END BODY |
| RUBBER SEAL |
| STEEL CORROSION RESISTING SHIELD |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| 66 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| SURFACE TREATMENT | CADMIUM INNER RING |
| CADMIUM OUTER RING |
| CADMIUM SHIELD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHIELD |
| STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 3.1590 INCHES NOMINAL |
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND |
| 0.2500 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 1.5740 INCHES NOMINAL |
| OUTER RING WIDTH | 0.3440 INCHES MINIMUM AND |
| 0.3540 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4950 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 2.3750 INCHES NOMINAL |
| SHANK STYLE | INTERNALLY THREADED |
| SHANK DIAMETER | 0.6250 INCHES NOMINAL |
| SHANK THREAD LENGTH | 1.0000 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.437 INCHES |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SHIELD QUANTITY | 2 |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| LUBRICATION MATERIAL | GREASE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 79RG9 |
| DESIGN CONTROL REFERENCE | 123CM10028-501 |