|
|
|
National Stock Number:
3040-00-221-1133
Federal Supply Class:
3040
National Item Identification Number:
002211133
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 305-523379-3 | 89372 | ROCKWELL INTERNATIONAL CORP NORTH AMERICAN AIRCRAFT OPNS |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 0.890 INCHES NOMINAL | | FIRST END DIAMETER | 0.4750 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 0.810 INCHES NOMINAL | | OVERALL LENGTH | 7.754 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11 COMP 7075 COND T6511 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | ALUMINUM ALLOY | | SECOND END GROOVE DIAMETER | 0.9350 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.1780 INCHES NOMINAL | | SECOND END DIAMETER | 1.1840 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 0.062 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED | | STEP QUANTITY | 2 |
|
|