|
|
|
National Stock Number:
3040-00-218-3710
Federal Supply Class:
3040
National Item Identification Number:
002183710
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 171624D | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 171624D | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 4258P | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 4258P | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | AD14-S47-57PC33 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | SL-4276 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL-4279 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL4276PC33 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL4276PC33 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL4279PC33 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL4279PC33 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL4637PC33 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | SL4637PC33 | 93232 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END EXTERNAL THREAD LENGTH | 0.500 INCHES NOMINAL | | FIRST END DIAMETER | 1.1250 INCHES NOMINAL | | FIRST END STYLE | EXTERNAL THREADED | | LARGEST STEP DIAMETER | 2.250 INCHES NOMINAL | | OVERALL LENGTH | 26.812 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END EXTERNAL THREAD LENGTH | 1.312 INCHES NOMINAL | | SECOND END HOLE DEPTH | 1.000 INCHES NOMINAL | | SECOND END HOLE DIAMETER | 0.1562 INCHES NOMINAL | | SECOND END DIAMETER | 1.2480 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL | | SECOND END STYLE | CROSS DRILLED AND EXTERNALLY THREADED | | STEP QUANTITY | 11 | | SURFACE FINISH | 63.0 MICROINCHES |
|
|