|
|
|
National Stock Number:
3040-00-213-2107
Federal Supply Class:
3040
National Item Identification Number:
002132107
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 151449 | 00198 | PRATT & WHITNEY CANADA CORP | | 151449 | 77445 | RTX CORPORATION | | 211263 | 00198 | PRATT & WHITNEY CANADA CORP | | 211263 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.0200 INCHES MINIMUM AND 1.0400 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 3.0330 INCHES MINIMUM AND 3.0380 INCHES MAXIMUM | | OVERALL LENGTH | 23.2500 INCHES MINIMUM AND 23.2700 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6263 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.2480 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 1.2920 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 23 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 1.4375 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.6300 INCHES MINIMUM AND 1.6500 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 1.4920 INCHES MINIMUM AND 1.4940 INCHES MAXIMUM | | SPECIAL FEATURES | PLUS PART NUMBERS 83882,33146 AND 98687 | | STEP QUANTITY | 7 |
|
|