|
|
|
National Stock Number:
3040-00-213-0334
Federal Supply Class:
3040
National Item Identification Number:
002130334
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 20352 | 71871 | ALFA LAVAL INC | | A1063PC57 | 71871 | ALFA LAVAL INC | | A1064PC57 | 71871 | ALFA LAVAL INC | | A882PC27 | 71871 | ALFA LAVAL INC | | A883PC27 | 71871 | ALFA LAVAL INC | | A890PC29 | 71871 | ALFA LAVAL INC | | A891PC29 | 71871 | ALFA LAVAL INC | | A892PC29 | 71871 | ALFA LAVAL INC | | A893PC29 | 71871 | ALFA LAVAL INC | | A908PC29 | 71871 | ALFA LAVAL INC | | A909PC29 | 71871 | ALFA LAVAL INC | | A917PC57 | 71871 | ALFA LAVAL INC | | A918PC57 | 71871 | ALFA LAVAL INC | | A923PC57 | 71871 | ALFA LAVAL INC | | A924PC57 | 71871 | ALFA LAVAL INC | | A925PC57 | 71871 | ALFA LAVAL INC | | A926PC57 | 71871 | ALFA LAVAL INC | | A981PC27 | 71871 | ALFA LAVAL INC | | A982PC27 | 71871 | ALFA LAVAL INC |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END STYLE | TAPERED WITH FLAT | | FIRST END TAPER LENGTH | 0.375 INCHES NOMINAL | | FIRST END TAPER MAJOR DIAMETER | 0.8600 INCHES NOMINAL | | FIRST END TAPER | 13.8564 PER FOOT IN INCHES | | LARGEST STEP DIAMETER | 0.860 INCHES NOMINAL | | OVERALL LENGTH | 4.625 INCHES NOMINAL | | MATERIAL | STEEL | | SECOND END EXTERNAL KEYWAY LENGTH | 0.750 INCHES NOMINAL | | SECOND END DIAMETER | 0.6250 INCHES NOMINAL | | SECOND END STYLE | FLAT KEYWAY | | SECOND END KEYWAY DEPTH | 0.094 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.1250 INCHES NOMINAL | | STEP QUANTITY | 3 |
|
|