|
|
|
National Stock Number:
3040-00-199-5771
Federal Supply Class:
3040
National Item Identification Number:
001995771
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 761-1351 | 13499 | ROCKWELL COLLINS, INC. | | 761-1351-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.1170 INCHES MINIMUM AND 0.1185 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | RADIO AND TELEVISION COMMUNICATION EQUIPMENT,AIRBORNE | | LARGEST STEP DIAMETER | 0.249 INCHES MINIMUM AND 0.252 INCHES MAXIMUM | | OVERALL LENGTH | 2.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 303 | | SECOND END DIAMETER | 0.1250 INCHES MINIMUM AND 0.1251 INCHES MAXIMUM | | STEP QUANTITY | 4 |
|
|