5999-00-197-3621 CONTACT,ELECTRICAL Index 6740-00-197-3630 TABLE,FILM PLOTTING

National Stock Number:
3040-00-197-3626

Federal Supply Class:
3040

National Item Identification Number:
001973626

Description:
SHAFT,SHOULDERED

Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.


Manufacturer Information:
50256219139EASTMAN KODAK CO


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END DISTANCE FROM END TO GROOVE1.850 INCHES NOMINAL
FIRST END DIAMETER0.3740 INCHES NOMINAL
FIRST END GROOVE DIAMETER0.3500 INCHES MINIMUM AND 0.3550 INCHES MAXIMUM
FIRST END GROOVE WIDTH0.0250 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM
FIRST END STYLECIRCULAR GROOVED
LARGEST STEP DIAMETER0.374 INCHES NOMINAL
OVERALL LENGTH8.488 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONEASTMAN KODAK EK-135B MFR REF ALL MATERIAL RESPONSES
MATERIALSTEEL CORROSION RESISTING
SECOND END GROOVE DIAMETER0.3500 INCHES MINIMUM AND 0.3550 INCHES MAXIMUM
SECOND END GROOVE WIDTH0.0250 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM
SECOND END DIAMETER0.3740 INCHES NOMINAL
SECOND END DISTANCE FROM END TO GROOVE1.500 INCHES NOMINAL
SECOND END STYLECIRCULAR GROOVED
STEP QUANTITY11


Click here to Register for Free 30-day Trial