|
|
|
National Stock Number:
3040-00-196-5344
Federal Supply Class:
3040
National Item Identification Number:
001965344
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 885940-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 885940-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.3730 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | FIRST END SLOT DEPTH | 0.790 INCHES MINIMUM AND 0.800 INCHES MAXIMUM | | FIRST END SLOT WIDTH | 0.020 INCHES MINIMUM AND 0.032 INCHES MAXIMUM | | FIRST END INTERNAL THREAD LENGTH | 0.500 INCHES NOMINAL | | FIRST END STYLE | SLOTTED AND INTERNALLY THREADED | | LARGEST STEP DIAMETER | 0.499 INCHES NOMINAL | | OVERALL LENGTH | 6.160 INCHES MINIMUM AND 6.180 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.4991 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM | | SECOND END STYLE | PLAIN | | SPECIAL FEATURES | FIRST END SERATED EXTERNALY 0.50,IN. FROM END 23 TEETH ASA B5.26-1950 STANDARD INVOLUTE;SECOND END 0.346 IN. DIA 1.1 IN. DEEP | | STEP QUANTITY | 4 |
|
|