|
|
|
National Stock Number:
3040-00-184-7843
Federal Supply Class:
3040
National Item Identification Number:
001847843
Description:
SHAFT,STRAIGHT
Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
|
Manufacturer Information:
| 037-0070-00 | 26840 | HALE PRODUCTS, INC. | | 037-0070-00-2 | 26840 | HALE PRODUCTS, INC. | | QL-25F | 26840 | HALE PRODUCTS, INC. |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 5.220 INCHES NOMINAL | | FIRST END DIAMETER | 0.7500 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.5620 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.3750 INCHES NOMINAL | | FIRST END STYLE | CIRCULAR GROOVED | | OVERALL LENGTH | 10.438 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SPECIAL FEATURES | 1ST END FLATTED 1.000 IN. LG FROM END,O.125 IN. DEEP,0.625 IN. W,180 DEG APART;0.500 IN. DRILLED HOLE THRU FLATTED SURFACES 0.438 IN. FROM 1ST END TO HOLE CENTER | | SECOND END GROOVE DIAMETER | 0.5620 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.3750 INCHES NOMINAL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 2.063 INCHES NOMINAL | | SECOND END STYLE | CIRCULAR GROOVED |
|
|