|
|
|
National Stock Number:
3040-00-181-2997
Federal Supply Class:
3040
National Item Identification Number:
001812997
Description:
CONNECTING LINK,RIGID
Detail:
An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
|
Manufacturer Information:
| 114C3010-26 | 77272 | THE BOEING COMPANY |
|
Techincal Specification:
| END ATTACHMENT FORK WIDTH | 0.562 INCHES NOMINAL FIRST END | | END ATTACHMENT FORK WIDTH | 0.895 INCHES NOMINAL SECOND END | | END ATTACHMENT HOLE DIAMETER | 0.313 INCHES MAXIMUM BOTH ENDS | | END ATTACHMENT LENGTH | 3.280 INCHES NOMINAL FIRST END | | END ATTACHMENT LENGTH | 3.340 INCHES NOMINAL SECOND END | | BODY CONSTRUCTION | TUBULAR | | BODY DIAMETER | 2.000 INCHES NOMINAL | | LINK STYLE | SOLID SHANK | | OVERALL LENGTH | 41.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | WW-T-785, TY-1, COMP 2024, TEMP T4 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY | | SPECIAL FEATURES | EFFECTIVE LENGTH: 40.000 INCHES; LINK THREAD INFO; RIGHT HAND, LENGTH 1.090 INCH 7/16-20 NF, DIAMETER 1.060 1ST END, 1.180 2ND END; END ATTACHMENT INFO: 2ND END CLEVIS UPPER JAW HAS DRILLED HOLE DIAMETER OF 0.4388 TO 0.4393 INCH, 2ND END CLEVIS LOWER JAW HAS DRILLED HOLE DIAMETER OF 0.3120 TO 0.3130 INCH; MATERIAL STEEL, MIL-S-5000 COMP 4340 COND F BOTH ENDS, SURFACE TREATMENT ANODIZED, MIL-C-6541 BOTH ENDS, LOCKNUT INCLUDED, FORK DEPTH 1.650 1ST END, 1.710 2ND END; FORK SPAN WIDTH 0.297 1ST END, 0.590 2ND END; FORK END TO HOLE CENTER 0.530 1ST END, 0.590 2ND END | | SURFACE TREATMENT | ANODIZE |
|
|