|
|
|
National Stock Number:
3040-00-179-5502
Federal Supply Class:
3040
National Item Identification Number:
001795502
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10913311 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7485 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | FSC APPLICATION DATA | VEHICULAR STEERING COMPONENT | | LARGEST STEP DIAMETER | 0.998 INCHES NOMINAL | | OVERALL LENGTH | 21.685 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-691 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND END HOLE DIAMETER | 0.3760 INCHES NOMINAL | | SECOND END DIAMETER | 0.9970 INCHES NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.498 INCHES NOMINAL | | SECOND END STYLE | TONGUE AND CROSS DRILLED HOLE | | SECOND END TONGUE THICKNESS | 0.558 INCHES NOMINAL | | SECOND END TONGUE WIDTH | 0.9970 INCHES NOMINAL | | STEP QUANTITY | 3 |
|
|