|
|
|
National Stock Number:
3040-00-176-1420
Federal Supply Class:
3040
National Item Identification Number:
001761420
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 66759 | 93835 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.4150 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.940 INCHES NOMINAL | | OVERALL LENGTH | 3.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643K ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END DIAMETER | 0.9400 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.5047 INCHES MINIMUM AND 0.5097 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 12 | | SECOND END STYLE | SPLINED (INVOLUTE) | | SECOND END PITCH DIAMETER | 0.5500 INCHES NOMINAL | | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL | | SECOND END SPLINE LENGTH | 1.094 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.6000 INCHES MINIMUM AND 0.6100 INCHES MAXIMUM | | STEP QUANTITY | 5 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|