5935-00-201-8523 CONNECTOR,PLUG,ELECTRICAL Index 5935-00-201-8526 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
3020-00-201-8525

Federal Supply Class:
3020

National Item Identification Number:
002018525

Description:
GEAR,ANTIBACKLASH,SPUR

Detail:
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.


Manufacturer Information:
1067714318876U S ARMY AVIATION AND MISSILE COMMAND
AP72ZW13029440W. M. BERG INC
Z6F130P100328DESIGNATRONICS INCORPORATED


Techincal Specification:
ATTACHMENT METHODMOUNTING HOLE
BORE STYLEPLAIN BOTH ENDS
BORE NOMINAL DIAMETER0.250 INCHES BOTH ENDS
FACE NOMINAL WIDTH0.104 INCHES
HUB NOMINAL DIAMETER0.437 INCHES FIRST END
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 303 OVERALL
MOUNTING HOLE TYPE AND QUANTITY1 THREADED TRANSVERSELY THROUGH HUB, FIRST END
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.221 INCHES FIRST END
NOMINAL OUTSIDE DIAMETER1.833 INCHES
NOMINAL OVERALL LENGTH0.325 INCHES
PITCH DIAMETER1.8046 INCHES MINIMUM AND 1.8056 INCHES MAXIMUM
PRECISION CLASSIFICATIONQUALITY NUMBER 10 OR QUALITY NUMBER 11
PRESSURE ANGLE20.0000 DEGREES
STYLE DESIGNATORPROTRUDING HUB
TEETH QUANTITY130
TOOTH FORMSTANDARD


Click here to Register for Free 30-day Trial