| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE STYLE | PLAIN BOTH ENDS |
| BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| FACE NOMINAL WIDTH | 0.083 INCHES |
| HUB NOMINAL DIAMETER | 0.280 INCHES SECOND END |
| HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 21 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | COPPER ALLOY 377 OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.070 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 56 TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.010 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.141 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 0.466 INCHES |
| NOMINAL OVERALL LENGTH | 0.234 INCHES |
| PITCH DIAMETER | 0.4355 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| TEETH QUANTITY | 28 |
| TOOTH FORM | STUB |