| MATERIAL | STEEL OVERALL |
| TEETH QUANTITY | 97 |
| TEETH TYPE | SINGLE HELIX |
| TOOTH FORM | STANDARD |
| TOOTH DIRECTION | LEFT |
| PRESSURE ANGLE | 20.0000 DEGREES |
| HELIX ANGLE | 72.4943 DEGREES |
| BACKLASH DESIGNATION | GRADE A |
| STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB |
| PITCH DIAMETER | 7.5000 INCHES NOMINAL |
| NOMINAL OUTSIDE DIAMETER | 7.638 INCHES |
| FACE NOMINAL WIDTH | 1.188 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.203 INCHES FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.422 INCHES SECOND END |
| BORE STYLE | W/ KEYWAY BOTH ENDS |
| BORE NOMINAL DIAMETER | 1.187 INCHES BOTH ENDS |
| KEYWAY NOMINAL WIDTH | 0.189 INCHES BOTH ENDS |
| NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.691 INCHES BOTH ENDS |
| HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| HUB NOMINAL DIAMETER | 2.188 INCHES FIRST END |
| 1.844 INCHES SECOND END |
| BODY STYLE | WEBBED, OFFSET, WITH LIGHTENING HOLES |
| ATTACHMENT METHOD | MOUNTING HOLE |
| MOUNTING HOLE TYPE AND QUANTITY | 4 THREADED AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.350 INCHES AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 24 AXIALLY THROUGH BODY, FIRST END |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 4.562 INCHES AXIALLY THROUGH BODY, FIRST END |
| SPECIAL FEATURES | 1ST END COUNTERBORED,1.327 IN. DIA BY 0.060 IN. DP |