| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | OPEN PROTECTED |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT TYPE | AC INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 23.000 LOW REVOLUTIONS PER MINUTE AND 33.000 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 55.0 OR 65.0 INPUT |
| HOLE CENTER TO SHAFT END DISTANCE | 0.180 INCHES NOMINAL SINGLE END |
| HOLE DIAMETER | 0.110 INCHES NOMINAL SINGLE END |
| LENGTH OF SHAFT FROM HOUSING | 0.610 INCHES SINGLE END |
| OVERALL HEIGHT | 3.750 INCHES |
| OVERALL LENGTH | 3.750 INCHES |
| OVERALL WIDTH | 2.080 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.250 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.562 INCHES |
| PHASE | SINGLE INPUT |
| SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END |
| SPECIAL FEATURES | WITH POSITIVE PAWL BRAKE |
| SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL REMOTE |
| WINDING TYPE | INDUCTION-WOUND ROTOR |
| TEMP RATING | -10.0 OPERATING CELSIUS AND 65.0 AMBIENT CELSIUS |
| TERMINAL TYPE AND QUANTITY | 2 BINDING POST |
| TORQUE RATING AND TYPE | 10.0 INCH-POUNDS STARTING |