| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 24.995 INCHES MINIMUM AND 25.000 INCHES MAXIMUM |
| AFTER END DESIGN | TAPERED |
| AFTER BEARING SLEEVE LENGTH | 9.729 FEET NOMINAL |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES |
| CRITICALITY CODE JUSTIFICATION | ZZZY |
| FURNISHED ITEMS AND QUANTITY | COMPACTING PLUG ASSEMBLY,1; COUPLING KEYS,4; LOCKING KEY,1; PROPELLER,1; SPLIT PINS,12 |
| FORWARD END COUPLING TYPE | SLEEVE |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 2.167 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 23.000 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 8.375 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 24.995 INCHES MINIMUM AND 25.000 INCHES MAXIMUM |
| FORWARD END COUPLING LENGTH | 1.750 FEET NOMINAL |
| FORWARD END COUPLING DESIGN | DETACHABLE |
| FORWARD END COUPLING OUTSIDE DIAMETER | 36.812 INCHES NOMINAL |
| KEYWAY QUANTITY | 4 |
| KEYWAY DEPTH | 1.088 INCHES NOMINAL |
| MAJOR DIAMETER | 15.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 23.100 INCHES MINIMUM AND 23.120 INCHES MAXIMUM |
| OVERALL LENGTH | 63.703 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23284, CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RESIN, EPOXY |
| QUANTITY | 2 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROL IAW NAVSHIPS 0948-045-7010 MATERIAL IDENTIFICATION AND CONTROL INSTRUCTION FOR LEVEL 1 ITEMS |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 3.167 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 23.040 INCHES MINIMUM AND 23.060 INCHES MAXIMUM |
| THREAD LENGTH | 13.000 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |