| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | AND 10050-4 AND 10050-6 |
| CONNECTION QUANTITY | 2 |
| CONNECTION TYPE | INLET |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.053 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 2600 PSI MA WP,NO TEMPERATURE SPECIFIED |
| MOUNTING BOLT CIRCLE DIAMETER | 1.7395 INCHES NOMINAL |
| MOUNTING GOVERNMENT STANDARD | AND 10260 |
| MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 10000.0 |
| PITCH DIAMETER | 6.000 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE MINOR DIAMETER | 0.550 INCHES MINIMUM AND 0.552 INCHES MAXIMUM |
| SPLINE PITCH | 20/60 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 12 |
| SPLINE LENGTH | 0.812 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.650 INCHES MINIMUM AND 0.651 INCHES MAXIMUM |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 9/16-18 |
| TORQUE LOAD RATING | 19.0 INCH-POUNDS |