|
|
|
National Stock Number:
1650-00-181-9344
Federal Supply Class:
1650
National Item Identification Number:
001819344
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 21-11844 | 05228 | PTI TECHNOLOGIES INC. | | AC900F121 | C0202 | PALL GMBH | | AC900F1225 | 18350 | PALL AEROPOWER CORPORATION | | AC900F1225 | C0202 | PALL GMBH |
|
Techincal Specification:
| BODY DIAMETER | 1.191 INCHES MINIMUM AND 1.193 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.753 INCHES MINIMUM AND 0.756 INCHES MAXIMUM | | BODY OVERALL LENGTH | 4.970 INCHES MINIMUM AND 5.040 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | MOLDED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 25.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | FSC APPLICATION DATA | HYDRAULIC SYSTEM,ACFT | | MATERIAL | PLASTIC FILTERING MEDIUM | | MATERIAL | PLASTIC SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|