|
|
|
|
 | 2840-00-190-3358 | SHIELD,HEAT,AIRCRAFT GAS TURBINE | 02/24/1971 |
|
 | 2840-00-190-3358 | SHIELD,HEAT,AIRCRAFT GAS TURBINE | | 0 |
|
 | |  MAK SAVUNMA SANAYI ELEKTRONIK OTOMOTIV INSAAT TURI | 0 | | 642722 | SHIELD, HEAT, AIRCRAF | SANDOVAL MRO SERVICE CENTER INC | 1 |
For additional information Register for Free Trial
|
|
|
 | 642722 | THERMAL STRUCTURES, INC | 54787 | | 642722 | SPECIALTY ENGINEERING CO | 60607 | | 642722 | RTX CORPORATION | 77445 |
For additional information Register for Free Trial
|
 | OVERALL LENGTH | 4.440 INCHES MINIMUM AND 4.560 INCHES MAXIMUM | | DIAMETER | 15.057 INCHES MINIMUM AND 15.177 INCHES MAXIMUM | | END ITEM IDENTIFICATION | ACFT ENG TF 33 | | CRITICALITY CODE JUSTIFICATION | FEAT | | ENGINE SECTION LOCATION | TURBINE | | SPECIAL FEATURES | FORM,FIT,FUNICITON |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | C | THIS PART REQUIRES ENGINEERING SOURCE APPROVAL BY THE DESIGN CONTROL ACTIVITY IN ORDER TO MAINTAIN THE QUALITY OF THE PART. AN ALTERNATE SOURCE MUST QUALIFY IN ACCORDANCE WITH THE DESIGN CONTROL ACTIVITY’S PROCEDURES, AS APPROVED BY THE COGNIZANT GOVERNMENT ENGINEERING ACTIVITY. VALID AMCS: 1, 2, 3, 4 AND 5. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 623.23 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | Y | The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | Q | Commerce Control List Items (CCLI) – Mutilation to the point of scrap required outside the United States. In the United States, mutilation requirement determined by the DEMIL Integrity Code. DoD Trade Security Controls (TSC) required in the United States. (Note 8). |
|
For additional information Register for Free Trial |
|  | | | SHIELD, HEAT, NO.4 BEARING UNITED TECHNOLOGIES CORP PRATT AND WHITNEY DIV NO FAT REQUIREMENT CONFIGURATION CONTROL APPLIES FURNISHED ITEM MUST CONFORM TO THE CITED REQUIREMENTS/REVISION. VARIATIONS MUST BE IDENTIFIED AND APPROVAL OBTAINED IN ACCORDANCE WITH MIL-STD-973 DATED 17 APR 92 AND INTERIM NOTICE 3 DATED 13 JAN 95. PARAGRAPH 5.4.2 REQUIREMENTS FOR ENGINEERING CHANGE PROPOSALS AND APPENDIX D INSTRUCTIONS FOR THE PREPARATION OF AN ECP UTILIZING DD FORMS 1692 THRU 1692-7. PARAGARAPH 5.4.3 REQUIREMENTS FOR REQUESTS FOR DEVIATION (RFD), 5.4.4 REQUIREMENTS FOR REQUESTS FOR WAIVER (RFW) AND APPENDIX E INSTRUCTIONS FOR THE PREPARATION OF REQUESTS FOR DEVIATION/WAIVER UTILIZING DD FORM 1694. PARAGRAPH 5.4.6 REQUIREMENTS FOR SPECIFICATION CHANGE NOTICES (SCNS), 5.4.7 REQUIREMENTS FOR NOTICES OF REVISION (NORS), APPENDIX F INSTRUCTIONS FOR PREPARATION OF SPECIFICATION CHANGE NOTICE UTILIZING DD FORM 1696 AND APPENDIX G INSTRUCTIONS FOR PREPARATION OF NOTICE OF REVISION UTILIZING DD FROM 1695. PARAGRAPH 5.4.8 CONFIGURATION CONTROL (SHORT FORM PROCEDURE.) . ITEM SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-130N DATED 17 DEC 2007. . OFFERORS REQUESTING SOURCE APPROVAL ON THE BASIS OF PREVIOUS MANUFACTURE OF PRODUCTION QUANTITIES OF SIMILAR AEROSPACE ITEM(S) FOR THE GOVERNMENT, OEM OR OTHER AEROSPACE USERS, MUST SUBMIT THE FOLLOWING ADDITIONAL DOCUMENTATION OR CERTIFICATIONS: 1. COMPLETE TECHNICAL DATA PACKAGE TO INCLUDE ALL ASSOCIATED DRAWINGS AND DRAWINGS OF SIMILAR PART(S) MANUFACTURED, INCLUDING RELEVANT PROCESS SPECIFICATIONS AND ACTUAL PROCESS SHEETS. 2. IDENTIFICATION OF MAJOR DIFFERENCES BETWEEN THE SIMILAR ITEM AND APPROVED PART. 3. EVIDENCE OF TESTING CONDUCTED ON THE MATERIALS USED IN THE PRODUCTION OF THE SIMILAR ITEM AND ASSURANCE MATERIALS ARE IN CONFORMANCE WITH REQUIRED SPECIFICATION. 4. DESCRIPTION OF VALUE ADDED BY OEM INCLUDING ANY FABRICATION, ON SITE INSPECTIONS, QUALITY ASSURANCE SURVEILLANCE ON SUBVENDERS, TOOLING, MANUFACTURING PROCESS SHEETS OR PROCESS DATA FOR USE IN THE FABRICATION OF THE SIMILAR ITEM. 5. EVIDENCE OR CERTIFICATION(S) THAT THE CONTRACTOR WAS RESPONSIBLE FOR ENTIRE MANUFAC- TURING PROCESS OF OF THE SIMILAR ITEM. EVIDENCE SHOULD INCLUDE ALL MATERIAL, IN-PROCESS INSPECTIONS AND CERTIFICATIONS. 6. EVIDENCE THAT THE ITEM WAS PRODUCED IN PRODUCTION QUANTITIES AND THE END ITEM(S) MET ALL REQUIREMENTS AND WERE ACCEPTABLE TO THE CUSTOMER, I.E., CONTRACT AND SHIPPING DOCUMENTS SHOWING PART NUMBER, STOCK NUMBER (IF APPLIC- ABLE), WITH QUANTITIES DELIVERED AND ACCEPTED. 7. COMPARISON OF MANUFACTURING AND INSPECTION PROCESSES SHOW THAT THE SIMILAR PART INCLUDES THE FULL SCOPE OF PROCESSES, INCLUDING INSPECTIONS REQUIRED TO MANUFACTURE THE SUBJECT ITEM AND THE PROCESSES ARE OF EQUAL OR GREATER COMPLEXITY. DSCR DOES NOT CURRENTLY HAVE AN APPROVED TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN. DATA IS PROPRIETARY OR INSUFFICIENT FOR COMPETITIVE PROCUREMENT. . 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. | Cage# 54787 and PartNumber# 642722
Cage# 60607 and PartNumber# 642722
Cage# 77445 and PartNumber# 642722 |
|
| | | PWA385 | DWG | BASIC | SS | 04/20/2012 | 03/03/2014 | 77445 | | PWA360 | DWG | BASIC | SS | 02/21/2013 | 06/27/2013 | 77445 | | PWA362 | DWG | BASIC | SS | 11/07/2012 | 03/23/2013 | 77445 | | PWA310 | DWG | BASIC | SS | 06/15/2012 | 09/25/2012 | 77445 | | PWA367 | DWG | BASIC | SS | 10/20/2011 | 04/11/2012 | 77445 | | PWA355 | DWG | BASIC | SS | 08/11/2009 | 10/22/2009 | 77445 | | PWA830 | DWG | BASIC | SS | 06/29/2009 | 09/11/2009 | 77445 | | PWA310 | DWG | BASIC | SS | 11/19/2008 | 05/07/2009 | 77445 | | PWA385 | DWG | BASIC | SS | 09/29/2005 | 01/27/2007 | 77445 | | 642749 | DWG | BASIC | DD | 06/18/1971 | 09/25/2006 | 77445 |
|
|
|
|
|
|
|
|